Maximize Your
Melbourne Sunshine

Melbourne Panel Care charges $10 per panel with a $150 minimum call-out fee — which covers most standard residential systems. Factors like roof height, number of storeys, and the severity of soiling can affect the final quote. Use our calculator above for an instant, transparent estimate.

We strongly advise against it. Climbing onto a wet, sloping roof creates serious safety risks covered by WorkSafe Victoria guidelines. Standard tap water leaves mineral deposits (calcium spots) that reduce efficiency. Abrasive tools or pressure washers can crack the glass from thermal shock or scratch the coating permanently — and may void your manufacturer's warranty entirely.

No — this is the most common misconception we encounter. Rain may rinse loose dust, but it bakes on pollen and bird droppings and leaves behind mineral deposits as it dries — making grime harder to remove over time. Think of it like waiting for a rainstorm to wash your car. Manual cleaning with pure deionised water is the only way to achieve a streak-free, efficiency-restoring result.

Studies show dirty solar panels lose between 10% and 35% of their energy output depending on the level of soiling. Most Melbourne homeowners see a measurable recovery immediately after a professional clean — with heavily soiled or bird-affected arrays recovering the most. Our customers regularly report recovering 20–30% of lost output after a single service.

No — provided the cleaning is done correctly. Melbourne Panel Care uses deionised pure water and soft-bristle equipment only, following manufacturer-approved methods. In fact, many panel warranties include maintenance clauses stating that neglecting to clean can void the warranty if dirt-related damage occurs. Always avoid services using pressure washers or soaps and detergents.

The gap between your panels and the roof is the perfect shelter for pigeons, myna birds, and starlings — species that thrive in Melbourne's northern and western suburbs. Bird droppings are highly acidic and corrode wiring, frames, and panel coatings over time. Nesting materials block airflow underneath, causing heat build-up and dangerous hotspots that shorten your system's lifespan and reduce output significantly.

Bird proofing involves fitting a durable, UV-resistant stainless steel mesh around the perimeter of your solar array. The mesh is secured to panel frames using non-invasive clips — no drilling or screwing into the panels — so your warranty remains intact. It completely blocks bird and pest access to the space underneath while maintaining the airflow your panels need to stay cool and perform at their best.

Our health inspection includes a visual check of every panel for micro-cracks, discolouration, and hotspots; an assessment of wiring, connectors, and mounting integrity; and a performance review of your inverter. You receive a detailed written report after the visit — useful for detecting faults early, supporting warranty claims, and benchmarking your system's output year on year.

We service Epping, Lalor, Reservoir, Meadow Heights, Berwick, Werribee, and surrounding suburbs across Melbourne's northern and western corridors. Not sure if we cover your area? Contact us for a quick confirmation and an obligation-free quote — we're always expanding our service zones.